067-435858 050-1-000-381 Mon - Sat 8:00 am - 6:30 pmAl Mohiyath, Opp. New Ind. Area Ajman – U.A.E
Certified
ISO 9001-2008
Since
1989
One of the Oldest Suppliers
Serving UAE Since 1989

Is Number One Diesel Fuel the Same as Kerosene? What Diesel Fuel Suppliers in UAE Should Tell You

No, number 1 diesel is not the same as kerosene. They’re right next to each other on the refinery chart, but they’re different fuels for different jobs.

Both come from the same middle cut of crude oil, so they burn similarly. That’s why people mix them up and why some top up a diesel tank with kerosene when supplies run short. The engine often starts. The damage usually shows up later, often in the injection pump.

If you run a generator or a few trucks in the UAE, understanding number 1 diesel vs. kerosene is worth the effort. Below, you’ll see how the two differ and what diesel fuel suppliers in UAE should tell you before you place an order.

What number 1 diesel actually is

Diesel isn’t a single fuel; it’s graded under the ASTM D975 standard, and No. 1-D is the lighter, thinner grade. No. 2-D is the heavier one; that’s the one most road vehicles run on.

So why is there a light grade? Cold weather. The thin fuel will keep on flowing in the winter, which is why people in the cold regions buy it. It has a bit less energy per litre so you’ll get a bit less mileage.

Now imagine the UAE. Summer days routinely hit 45°C and the winter nights are quite mild. You don’t need fuel built to resist frost down here. Number 1 diesel is rarely the first choice for a fleet in Dubai or Sharjah and the standard grade that your engine manufacturer would recommend is probably the more sensible option.

The local fuel is sold to spec against both international and national standards and theie applications depends on the product. Ask the supplier which it is for the batch you’re buying. A clear answer is a good thing. If it takes you three calls to get an answer, then you’ve learned something.

Difference between kerosene and diesel

Start with what each fuel was refined to do. Diesel is for compression engines. Kerosene is for jet turbines and heaters. Most of the other differences are down to that.

Lubricity is the big one. Your injection pump is reliant on the fuel to lubricate the moving parts. Kerosene is a thinner fuel and therefore provides less lubrication. If you run it for months the pump and injectors can start to wear and you’ll end up having to replace them which is very expensive.

Then there’s ignition. A diesel engine ignites the fuel by compressing it and the cetane number is a measure of how easily that happens. ASTM D975 requires a minimum cetane number of 40 for road diesel. Kerosene specs are absolutely not cetane based.

Density is also considered to be different because Jet A-1 (the aviation kerosene) is specified at between 775 and 840 kg per cubic metre. European road diesel (EN 590) is 820 to 845. The lighter fuel has a little less energy per litre.

Flash point is of course important if you’re storing fuel. ASTM D975 specifies a minimum of 38°C for No. 1-D and 52°C for No. 2-D. Check the current editions before citing any of those figures.

Additives as well. Diesel will often have lubricity and ignition improvers in it. Kerosene sold for heating or for flying won’t (as a rule) because you don’t expect it to lubricate a pump.

Number 1 Diesel vs Kerosene at a Glance

Here’s the quick side-by-side before we get into the details.

PointDieselKerosene
Built forRunning enginesJet turbines and heaters
Ignition quality (cetane)Minimum 40 under ASTM D975Not specified
LubricityBetter, often boosted with additivesLower, little engine protection
DensityRoad diesel (EN 590) runs 820 to 845 kg per cubic metreJet A-1 runs 775 to 840 kg per cubic metre
Flash point (minimum)38°C for No. 1-D, 52°C for No. 2-D38°C for Jet A-1
Energy per litreSlightly higherSlightly lower

Can kerosene be used in place of diesel fuel?

Technically some engines will run on it for a while. That’s the straight answer. Running and running well are two very different things.

Say the site manager finds the generator almost dry on a Friday evening. There’s a drum of kerosene sitting two metres away which seems like a perfectly innocuous fix and may well be sufficient to get it going for a few hours. The problem is that it manifests itself weeks later in the form of a difficult start or a noisy pump.

Lower lubricity is the principal issue. The newer engines with such tight injection tolerances are even more fussy. You can end up with a loss of power and the emission hardware may not be able to cope. Many of the manufacturers will also say that only their approved diesel will keep the warranty valid.

People often consider it all about saving a few fils, however, you should compare the kerosene price with diesel price and then think about what a pump replacement costs.

Rules do matter because the way you use the fuel will determine whether it’s subject to taxation, whether it’s available for sale, or whether it’s subject to control. Check what applies to your operation in the UAE before you do anything else.

In cold countries, some people will blend kerosene into the diesel to prevent it gelling. It’s a well established practice. It does, of course, reduce lubricity, and many engine manufacturers would now say that you shouldn’t do it. Never guess at a ratio. Always refer to the manual. If the manual says nothing then call the manufacturer.

If you think the tank has already been mixed then stop it. Drain it and test a sample before the engine does the testing for you.

Diesel fuel types and grades worth knowing

1 and 2 is one way of looking at it. Sulfur is another and for the majority of buyers that’s the one that matters.

ASTM D975 has various sulfur classes (e.g., S15 and S500), with S15 limiting sulfur to 15ppm. European diesel (EN 590) is limited to 10ppm. 10ppm low sulphur diesel is available in the UAE and is appropriate for use in newer engines which have exhaust treatment as sulfur can damage the exhaust treatment over time.

You should also use matters as well because marine fuel and roadside can be under different requirements. What is okay in a delivery van may well be the wrong choice for a drilling rig.

So if someone says “just get diesel” you need to ask which one. You need to ask about the grade and the sulfur level. Then you need to ask what the engine is going to be doing. Getting that bit of information right upfront is far cheaper than having a breakdown.

What diesel fuel suppliers in UAE should tell you?

A good supplier will explain the product prior to discussing price. If the entire conversation is a quote that’s worth noting.

Ask what grade and specification the fuel is and what the sulfur level is. Ask if they can provide you with test results or quality papers for that batch. Ask about how it’s stored and how it’s delivered. Then of course ask the most important question of all: is this the right fuel for my engine? A supplier who says “probably not” when that’s the truth has got your back.

Red flags are easy to spot once you know what they are. A dodgy answer about the grade. Missing documentation. A price which is way below every other quote and gives no reason for it. Someone who’s pushing a different fuel to what your engine requires. Any one of those is a perfectly valid reason to walk away.

If you’re looking for an industrial diesel fuel supplier in the UAE then look beyond the price per litre. Late deliveries will stop your machines. A supplier who will arrange on-site diesel refueling means your crew don’t have to make the trip to the pump which is hours saved over the course of a month. Poor storage can also have a detrimental effect on the quality of the fuel so ask where the product is stored prior to it reaching you.

The product range is definitely worth a look. On our page Dubai diesel trading supplier in UAE, you can see what’s on offer prior to you even pick up the phone. That makes the first call a lot shorter and a lot more productive.

One more habit. Ask for a delivery note which states the grade and quantity, and keep it. If something odd turns up in the engine later on, that note will go a long way to settling arguments.

Final thoughts

Number 1 diesel and kerosene are from the same family. They’re not designed to do the same job. Diesel is for running engines and looking after the fuel system. Kerosene is for aircraft and heaters. You could probably get away with swapping one for the other today, but it would cost you next month.

Quick takeaways. Read your engine manual before you go looking for a grade; in the UAE heat, you simply don’t need the lighter grade (1) anyway. Check the sulfur level. Ask for quality documentation. And keep kerosene out of the tank as a cheap alternative.

The supplier is just as important as the fuel. You want someone who can explain the grade and who will admit when a product isn’t right for your equipment. You want someone who will be upfront. If they’re going to dodge the issue then that’s exactly what they’re doing. If the answer you get is just ‘well, that’s the way it is’ then that’s the answer you’re going to get.

A little habit helps with this. Keep the spec sheet from each delivery in a folder. If something odd turns up in the engine later on you’ll have something to look back at.

If you’re looking at diesel fuel suppliers in the UAE for a fleet or a site then start with a chat rather than a price list. Tell them what you run and how much you burn per month and then tell them where the fuel is going. They can then recommend the correct grade and arrange the delivery or on-site refueling.

Not sure what’s suitable for your equipment? Just ask before you order.

Frequently Asked Questions

Is Number 1 diesel the same as kerosene?

No. A few of the grades do overlap, but #1 diesel is a diesel grade for engines with specific specs. Kerosene is a completely different fuel, one for aviation and heating.

What’s the difference between diesel and kerosene?

Diesel is an engine fuel, so it has better lubricity and a specified ignition quality. Kerosene is lighter, has slightly less energy per litre and generally doesn’t have the protection that an injection pump needs.

Can kerosene be used instead of diesel fuel?

It may run for a short time in some engines. It does reduce lubrication, can damage the pump, and may well void a warranty. Follow what the engine manufacturer says.

What are the different types of diesel fuel?

Diesel is grouped by grade, such as No. 1-D and No. 2-D, and by sulfur level, such as S15 or S500. Low sulfur diesel at 10 ppm is also offered for newer engines.

Where can I buy quality diesel fuel in the UAE?

Choose a reliable supplier that offers the correct diesel grade and provides proper quality test reports. Before placing an order, confirm the fuel specifications, delivery availability, pricing, and whether the supplier can meet your required quantity.

About the author